Sunday, June 30, 2013
Saturday, June 29, 2013
At first I thought this was the combine that is Colorado's state flower, but it's too purple rather than blue. It seems more like royalty so perhaps it should have been the state flower. Then again, maybe it doesn't grow widespread. That said, common sighting apparently isn't a criteria since I've never seen a lark bunting. I'm told they are found only on the eastern side of the state. Could have designated an eagle or a raven or a magpie--they seem to be everywhere.
Friday, June 28, 2013
This card started with the big flower and a die cut that also puts in the crease lines. I added two punched flowers for the center and a pearl for a bit more color. The border is due cut also and I added little, white punched flowers. A pretty fast design once the flower is put together, although gluing the border in place takes a bit of time.
Thursday, June 27, 2013
The big part of the flower was individual petals die cut. The layered flowers were punched, as was the butterfly. I layered two butterflies and then put black thread around the bodies and tied it for the antennae.
Black and white with just a bit of color - one of my favorites.
Wednesday, June 26, 2013
Tuesday, June 25, 2013
Monday, June 24, 2013
Sunday, June 23, 2013
Saturday, June 22, 2013
I came upon this idea online (stampladee.com) and gave it a try. The corners are folded on five paper strips that are 2.5 x 1 inch By using paper pritned on both sides you get additional color. After I adhered the folded strips I added some perferations, thin satin ribbon and faux jewels.
I'm not so crazy about this design that I'll make any more, but it was something different. I found it a little hard to embellish as things tended to distract rather than add anything. But it's complete enough on its own.
Friday, June 21, 2013
Thursday, June 20, 2013
This butterfly easel card was cut using my electronic cutter which I seem to depend upon more and more. It does such a better job than my hands do. I decided the addition of the smaller section on each butterfly added a nice dimension so that was my contribution to the design. I ran those through an embossing folder and added some faux jewels for accent. I also used an additional cut file for those great bodies and feelers. The text is stamped and adhered with foam tape so the smaller butterfly had something to keep it up. A double easel; ya gotta love that!
Wednesday, June 19, 2013
Tuesday, June 18, 2013
The black strip to the left is die cut as are the leaves. The flowers and butterflies are punched. The strip below the zipper is washi tape. I added faux jewels for flower centers and after "day."
Bet you're wondering what's under the zipper. . . .
Something I didn't mention in previous posts is the importance of adhering well the area around the zipper as there's quite a bit of pressure on the paper when the zipper is pulled. Mine haven't been tested yet so I hope they work well.
Monday, June 17, 2013
This card shows the second orientation for the zipper die. You just have to be careful that the text under the zipper lines up so it is centered when unzipped. The flowers and flourish are also die cuts. The arrow is part of a stamp set that coordinates with the zipper. Flower centers are dimensional paint.
Sunday, June 16, 2013
Maybe the die cut for zippers has been around for some time but I just recently discovered it and thought, "what fun!" I hope recipients get a kick out of pulling the strip open to see the text that is revealed.
I've been playing with different designs (there's both a vertical and horizontal version of the die) and this was my first one. The dots are all washi tape. I covered cardstock with the black dots and then punched out the flowers. The smaller flowers are punched. I black embossed the hello over the tape. The card is flat and doesn't open as a standard card does.
The die and coordinating text stamps are available from Papertrey.
Saturday, June 15, 2013
The upper photo was taken from the train yesterday as we passed by the new wildfire that had started just a few hours earlier near Rifle (about 60 miles east of Grand Junction). It seemed to grow as we traveled by it but our perspective changed so I can't actually say that it did. We wondered if the darker smoke to the left was an indication that water was being put on the fire. It's far from a great photo due to the power lines and window reflections but I thought I'd share what we saw.
This was the second card that I made for the stamp club "sewing" theme. I electronically cut three sizes of ovals, two on patterned paper that I created by using a "tone on tone" method with rubber stamps. I used my machine to stitch down the center of the carefully placed ovals and then cut the support piece into a circle. I pulled up the top two layers of ovals but, of course, going through the mail they will get flattened again. The flourishes are die cut and the flower is multi layers of punched flowers. I added jewels for the flower center and as little embellishments near each flourish. The card front was folder embossed. My sewing machine got a good workout recently.
Friday, June 14, 2013
I have to wonder how so many colors could be in a single petal. This little beauty seems to have gone all out to be so colorful. And to look at the bud that hadn't opened, one wouldn't suspect the orange to dominate. Very interesting how many tricks Mother Nature has up her sleeve. Ya just gotta say, "Wow!"
Thursday, June 13, 2013
The theme for this month's stamp club exchange was "sewing." This is one of the cards I made and I started by electronically cutting the diamonds out of four different patterned papers. I actually stitched those to a piece of cardstock after I taped the punched edge in place. The ribbon is held in place with little glue dots and I added a needle with thread, two tiny straight pins, and a button. The largest embellishment is a thread bobbin. I cut that with my electronic cutter and added a length of embroidery thread.
I don't often use my sewing machine in cardmaking so this was a good opportunity to do so.
Wednesday, June 12, 2013
Tuesday, June 11, 2013
Monday, June 10, 2013
Sunday, June 9, 2013
I thought I'd change things up a bit and add this recipe. You never know what you might find while shopping and there was this blackboard at the Crate And Barrel in the Bridgeport Mall in Oregon. I thought it was a very clever idea. And I thought it was something I would actually make so that was an added bonus. In case you have trouble reading it:
Cherry Tomato Jam for Cheese
2 cups cherry tomatoes
3/4 cup sugar
3 tbsp fresh squeezed lemon juice
zest from one lemon
1/2 tsp fresh rosemary
Boil all together
Since it is recommended to go with cheese, it's right now my alley. I even have some specialty cheese with which to try it. Can't wait.
Saturday, June 8, 2013
I assume this is two types of yucca and the shorter one is more typical of what we commonly see growing in the wild. I know that deer really enjoy eating those blossoms - but I've not tried them to see what all the shouting is about. The Native Americans used the yucca for all kinds of things because the "leaves" have cords that appear when the plant dries up. They wove the cords into ropes, sandals, etc. I can attent that the points of those leaves are really very sharp.
Friday, June 7, 2013
Thursday, June 6, 2013
Wednesday, June 5, 2013
Tuesday, June 4, 2013
Monday, June 3, 2013
This plant I know because it's one of the plants I'm able to grow in my garden - chickens and hens. It's a succulent and doesn't need a lot of attention. This one is quite attractive because of the dark color at the tip of each petal (mine doesn't have that bonus) and it contrasts nicely with the hunk of wood next to it that's a lighter color. Wonder how much it will grow in the course of the summer?